Fantago

Video Switchers & Live Production

Ross Video RossTalk Control Software BETA

Control for Ross Video devices using the RossTalk protocol over TCP.

Handlers run inside Fantacore — the file is a plugin, not a standalone program. Start with the free 30-day trial.

How to connect Ross Video RossTalk to Fantacore

  1. Open the Fantacore Dashboard and click Add Device.
  2. Pick the RossTalk (Ross Video) handler from the device type list (internal id ross_rosstalk).
  3. Enter the IP address of your Ross Video RossTalk, then set protocol TCP and port 7788.
  4. Save and connect. Fantacore starts polling the device and publishes its feedback variables, ready to use in panels, sequences and logic flows.
  5. Drag the actions below onto a panel button, a Stream Deck key, a schedule or a logic flow node.
RossTalk (Ross Video) handler specifications
ProtocolTCP
Default port7788
Handler version1.0.1
AuthorFantacore Bridge
Internal IDross_rosstalk

Description & Instruction

Control for Ross Video devices using the RossTalk protocol over TCP.
Setup: Port 7788, Terminator \\r\\n.

Command Integration Guide

This guide explains how to send specific commands to the RossTalk (Ross Video) handler.

Generic Command Format (RossTalk over TCP):

The handler expects RossTalk commands, which are simple text strings terminated by CR LF (\\r\\n).

  • GPI 1 (Trigger GPI 1)
  • CC 1:01 (Fire Custom Control 1 on Bank 1)
  • ME1:CUT (Perform a CUT transition on ME 1)
  • XPT ME1:PGM:IN:1 (Route Input 1 to ME1 Program)

Integration Examples (assuming device name "ROSS_SW"):

Via HTTP GET:

http://<Fantacore_IP>:<HTTP_PORT>/sendTo/ROSS_SW?cmd=GPI%201

Via TCP/UDP Listener:

ROSS_SW:GPI 1

Remember to URL-encode the command string for HTTP GET requests if it contains special characters.

Ross Video RossTalk control — frequently asked questions

Does Fantacore support Ross Video RossTalk?

Yes. Fantacore includes a ready-made RossTalk (Ross Video) handler (version 1.0.1) that talks to the device over TCP, default port 7788. It is bundled with every licence and with the 30-day free trial — there is no per-device fee.

What protocol does the Ross Video RossTalk handler use?

TCP, default port 7788. Fantacore connects straight to the device over your production network, so no gateway, middleware or vendor software is needed in between.

Can I control Ross Video RossTalk from a Stream Deck?

Yes. Every Ross Video RossTalk action can be mapped to an Elgato Stream Deck key, to a button on a custom Fantacore touch panel, to a timed schedule, or to a logic flow triggered by another device — including devices from a different manufacturer.

Can I modify the Ross Video RossTalk handler?

Yes. The handler is a plain JavaScript file (ross_rosstalk.js) that you can download from this page, edit and drop back into Fantacore. You can also write your own handler from scratch — see the Developer Guide.

Control Ross Video RossTalk from a single interface

Fantacore drives Ross Video RossTalk alongside 50+ other broadcast, lighting, audio and smart home devices — from custom touch panels, an Elgato Stream Deck, a schedule or a logic flow. Runs offline.

Try free for 30 days Pricing

← All 56 device handlers