Fantago

Monitoring, Multiviewers & Master Control

Evertz VIP-X Control Software BETA

Control for Evertz VIP-X Multi-Image Display Processors.

Handlers run inside Fantacore — the file is a plugin, not a standalone program. Start with the free 30-day trial.

How to connect Evertz VIP-X to Fantacore

  1. Open the Fantacore Dashboard and click Add Device.
  2. Pick the Evertz VIP-X handler from the device type list (internal id evertz_vipx).
  3. Enter the IP address of your Evertz VIP-X, then set protocol TCP and port 31001.
  4. Save and connect. Fantacore starts polling the device and publishes its feedback variables, ready to use in panels, sequences and logic flows.
  5. Drag the actions below onto a panel button, a Stream Deck key, a schedule or a logic flow node.
Evertz VIP-X handler specifications
ProtocolTCP
Default port31001
Handler version1.0.0
AuthorFantacore Bridge
Internal IDevertz_vipx

Description & Instruction

Control for Evertz VIP-X Multi-Image Display Processors.
Setup: Protocol TCP, Port 31001. Enable Persistent Connection.

Command Integration Guide

This guide explains how to send specific commands to the Evertz VIP-X handler.

Generic Command Format (JSON-RPC 2.0 over TCP):

The handler expects JSON-RPC 2.0 messages. Each message must be a valid JSON string terminated by \\r\\n.

  • {"jsonrpc": "2.0", "id": 1, "method": "load_snapshot", "params": {"snapshot": {"id": 1}}} (Fire Snapshot 1)
  • {"jsonrpc": "2.0", "id": 2, "method": "set_display_layout", "params": {"display": {"id": 1}, "layout": {"id": 1}}} (Set Layout 1 on Display 1)
  • {"jsonrpc": "2.0", "id": 3, "method": "get_displays"} (Get list of Displays)

Integration Examples (assuming device name "EVERTZ_VIPX"):

Via HTTP GET:

Due to the structured JSON-RPC body, direct HTTP GET with all parameters can be cumbersome. It is recommended to use the Fantacore UI actions or TCP/UDP listeners.

Example (concept): http://<Fantacore_IP>:<HTTP_PORT>/sendTo/EVERTZ_VIPX?cmd={"jsonrpc":"2.0","id":1,"method":"load_snapshot","params":{"snapshot":{"id":1}}} (URL-encode the JSON string)

Via TCP/UDP Listener:

EVERTZ_VIPX:{"jsonrpc": "2.0", "id": 1, "method": "load_snapshot", "params": {"snapshot": {"id": 1}}}

Remember to URL-encode the JSON string for HTTP GET requests.

Evertz VIP-X control — frequently asked questions

Does Fantacore support Evertz VIP-X?

Yes. Fantacore includes a ready-made Evertz VIP-X handler (version 1.0.0) that talks to the device over TCP, default port 31001. It is bundled with every licence and with the 30-day free trial — there is no per-device fee.

What protocol does the Evertz VIP-X handler use?

TCP, default port 31001. Fantacore connects straight to the device over your production network, so no gateway, middleware or vendor software is needed in between.

Can I control Evertz VIP-X from a Stream Deck?

Yes. Every Evertz VIP-X action can be mapped to an Elgato Stream Deck key, to a button on a custom Fantacore touch panel, to a timed schedule, or to a logic flow triggered by another device — including devices from a different manufacturer.

Can I modify the Evertz VIP-X handler?

Yes. The handler is a plain JavaScript file (evertz_vipx.js) that you can download from this page, edit and drop back into Fantacore. You can also write your own handler from scratch — see the Developer Guide.

Control Evertz VIP-X from a single interface

Fantacore drives Evertz VIP-X alongside 50+ other broadcast, lighting, audio and smart home devices — from custom touch panels, an Elgato Stream Deck, a schedule or a logic flow. Runs offline.

Try free for 30 days Pricing

← All 56 device handlers